The Epson PowerLite Pro G6900WU is a 6000-lumen WUXGA projector built with large venues in mind. WUXGA resolution is 1920×1200, the new gold standard for conference room and auditorium projectors. It used to be a high-end format, but at this writing there are two hundred WUXGA projectors in production across a wide range of price points. It has broad market appeal due to its versatility — WUXGA projectors will display both 1920×1200 computer signals and HD 1080p video in native format, so it has become the go-to resolution for sharp, detailed projection display.
As installation projectors go, the Epson Pro G6900WU is compact and easy to handle, weighing in at just over 20 lbs. It is a single-lamp projector that is not only rich in features, but also more affordable than dual-lamp models. The Pro G6900WU is powerful enough to light some seriously big screens, versatile enough to handle just about any connection or media type, and aggressively priced within its performance class. It also has some features not found in other Pro G-series projectors that make it ideal for digital signage. And at $6,499, you can’t beat its combination of features and performance.
The Viewing Experience
The Pro G6900WU includes quite a few little touches that make video more pleasant to watch, such as an automatic iris and frame interpolation. The iris brings down black level and can be very helpful when viewing video or film, but only if room lighting can be reduced as well.
Frame interpolation smooths out judder in film and video. The Pro G6900WU’s FI circuit is more or less identical to those found on Epson home theater projectors. There are three different modes, labeled Low, Normal, and High. Low mode was most appropriate for film, as it displayed the fewest artifacts and the least amount of digital video or “soap opera” effect. High mode is overkill for film and 24p content, but has no negative effect on 60p video signals. Keep in mind that Frame Interpolation is not for everyone; some folks do not enjoy the effect when viewing film, but there are no real downsides to using it with video.
In short, the Pro G6900WU’s image is bright, color is excellent, and video quality is superb for its class. The projector’s black level is typical for a data projector, but in an auditorium this actually matters very little — and with the auto-iris engaged and the lights dimmed, black level becomes quite good.
Setup and Configuration
The Pro G6900WU comes with the Standard Zoom lens, a 1.82:1 manual zoom/focus lens that will put a 180″ image on screen from 16′ to just over 29′. The projector is available either as a bundle with the Standard Zoom, or as a bare body (Pro G6900WUNL, with the “NL” standing for “No Lens”). The latter is priced at $5,199 to the former’s $6,499. The lenses vary in price, with the Standard Zoom selling for $1,399, the Short Throw Zoom selling for $2,999, and the other lenses all priced at $1,899.
As for lens shift, the projector allows for both vertical and horizontal adjustment using manually-operated thumb knobs on the top of the projector. Once lens shift is dialed in, the projector has a sliding lock bar that prevents further adjustment or drift.
The exact range of the lens shift changes with each lens, but the standard lens allows for approximately 70% vertical adjustment in either direction and about 33% adjustment to the left or right. On a hypothetical 180″ diagonal image (95″ high by 153″ wide), that’s 66.5″ range up or down and 46″ of adjustment to the left or right.
The Pro G6900WU can be installed in an auditorium, but it can also be used on curved surfaces, hard corners, ceilings, floors, and portrait orientations. Digital signage-oriented features like arc correction, edge blending, corner wall projection, and 360-degree display make it possible to install the Pro G6900WU in positions that are either difficult or impossible for many other projectors.
The Pro G6900WU is easy to install and maintain, and even a surface-level examination of the projector reveals some thoughtful touches. The projector’s lens mount uses a quick-release system, so you can swap out lenses without a screwdriver. The air filter door uses a sliding lock system and filters can be changed without tools — though the air filter is built to last 10,000 hours, so it’s only an occasional maintenance item. The lamp door on the projector’s side is attached with two Phillips screws, so unfortunately lamp changes still require a screwdriver.
One final note: The Pro G6900WU includes a third lamp power selection called “Temp Interlock.” This mode keeps the lamp at full power unless the surrounding temperature rises outside the range for normal operation, at which point lamp power switches to ECO. If you were going to keep the lamp at full power, there is no reason not to use this setting, as it can help preserve your projector and improve lamp life.
Image quality. The Pro G6900WU’s stand-out feature is the balanced, natural quality of the image even in the projector’s brightest modes. The Pro G6900WU has well-saturated, bright color, a sharp and detailed image, and great dynamic range. The projector is as strong in video display as it is in data thanks in part to a Faroudja DCDi image processor, an automatic iris, and frame interpolation.
Connectivity. Nearly the entire rear surface of the Pro G6900WU is taken up by its connection panel. As the flagship model of Epson’s new G series, the Pro G6900WU features connectors for HDMI, DisplayPort, VGA, VGA monitor out, S-Video, composite, 5BNC component, wired LAN, WiFi (with a $99 adapter), both 1/8″ and RCA audio inputs, HDBaseT, and HD-SDI. That last one in particular is not found on any other projectors in the G Series line-up and is unique to the Pro G6900WU.
HDBaseT is getting a lot of attention lately, and for good reason. It combines HDMI, ethernet, and RS232 control over one inexpensive, non-proprietary, easily sourced Cat5e or Cat6 cable. Epson sells an HDBaseT transmitter box for $499 that bundles HDMI, Ethernet, and RS232 and sends them out over a single wire, but aftermarket products are also an option.
Arc correction. If your screen isn’t flat, the Pro G6900WU can correct for that. Arc Correction allows you to digitally fine-tune the projection geometry to compensate for a screen surface that is not perfectly flat. In other words, the Pro G6900WU can be used on curved screens without pincushion or barrel distortion. Moreover, the projector is capable of correcting focus in non-flat images, keeping your entire image crisp and clear. Arc correction does apply scaling to the image, so if you are using WUXGA or 1080p content you will lose the benefit of 1:1 native display.
Edge blending. For large-scale screens that require more than one projector, the Pro G6900WU has Advanced Edge Blending. All projectors in Epson’s G Series offer edge blending — the ability to seamlessly stitch the edges of two or more projectors’ images in order to make one fully integrated image. But the Pro G6900WU has the “advanced” version, which also includes support for curved surfaces and corner walls.
360-degree installation. Many projectors can only be installed horizontally due to heat concerns, but the Pro G6900WU can be installed in any position. One of several features aimed at digital signage, this allows the projector to be mounted in any orientation without fear of overheating or malfunction.
When you combine these three features — arc correction, edge blending, and 360-degree installation — you gain the ability to install the Pro G6900WU in some radically non-traditional setups, making it perfect for digital signage. You can aim the projector at a floor or ceiling, or project onto a vertically oriented screen. Getting more creative, you can use the Corner Wall feature to project a portrait-oriented image onto a curved pillar or sharp 90-degree corner. Getting more creative still, you can use a series of Pro G6900WU projectors to edge-blend a huge display all the way down one wall, around a corner, and onto the next. You could extend that display up onto the ceiling or down onto the floor. The flexibility afforded by these features make the Pro G6900WU a perfect projector for use in digital signage applications.
Scheduling and control. Like most large-venue projectors, the Pro G6900WU can be monitored and controlled over a wired network. Unlike most other comparable projectors, though, the Pro G6900WU has a scheduling feature that allows the projector to be programmed based on a timer and internal clock, which is especially useful in places where network connectivity is unavailable. Using the Scheduler, you can program the projector to turn itself on and off, change sources, change lamp power, mute sound and video, and adjust the volume. These actions can be programmed for a specific date or a repeating day of the week. While the scheduler is not as comprehensive as network monitoring, it is a great way to ensure that a projector does not accidentally stay on all night. It’s also ideal for digital signage — all of your displays can be set to turn off at the close of business, automatically.
Low fan noise. The Pro G6900WU is a bright projector, but it doesn’t sound like one. Fan noise, while not whisper-quiet, is comparable to what you’d get out of home theater projectors from a few years back – a low rush of air, noticeable but not annoying. That is a nice bonus, particularly if you’ve got the projector on a rolling cart close to the audience in the center aisle of a conference room.
3 year warranty with overnight replacement. When it comes to projector warranties, three years is about as good as it gets. But the Pro G6900WU’s warranty also includes Epson’s Road Service program, so if your projector fails while it is under warranty, Epson will overnight ship a replacement projector to you, free of charge. The warranty also includes 90 days of coverage on the lamp.
You Can Buy Epson Projector at https://www.projectorpro.online/